Lamination Punching

We efficiently cater to lamination requirements of our clients with the help of high speed presses of 100 ton, 125 ton, 160 ton, 200 ton and 350 ton with the variable speed of 200-700 SPM for lamination punching that we have installed at our production unit along with auto skewing and auto stacking controller.

Decarb Annealing

We have installed a Semi Continuous Decarb Annealing Furnace installed capacity of 750 M.T. per month for De-Carb Annealing and Bluing of Semi Processed Steel and thus converting the same into Electrical grade material suitable for Electrical Stampings. Under this Process, the Stampings pass through different chambers, which are electrically heated having positive atmosphere to reduce the Carbon percentage and develop a uniform Grain Structure thereby reducing the Watt losses of the material.

Cold Rolled Semi Processed Lamination Steel is probably the most common material in use today. Ease of stamping and low tool wear help to contribute to the low cost of finished laminations. Carbon steel is considered for applications where relatively high core losses are acceptable (D.C. pole pieces, low duty cycles, etc.) and low first cost of the end unit is of primary importance. This material is always annealed after stamping to develop optimum properties and remove the punching stresses. This adds little to the cost when done in a continuous furnace, with controlled atmosphere and allows an oxide coat to be added to the surface to provide interlinear resistance. The heat treatment is somewhat critical and when properly annealed, modern grades of Lamination Steel have core losses equivalent to the lower grades of silicon steel.

Die Casting

From the very beginning our determination to provide customers with full support has been realized by establishing our own die-casting facility for rotors and back covers components. We have installed a full range of Die-casting machines to meet our orders. The unit has been designed and developed to cater to the growing demand for die-casting of rotors and covers Components. The Company possesses CNC Machines along with other required equipment to manufacture finished components in due course of time. In-addition to this the company also has Die Casting facilities with horizontal and vertical Die Casting machines installed at all units.


011-45107016, 9312567018


I.P. 42 AND I.P. 45 Raipur Sahkari ,
Audyogik Kshetra, Bhagwanpur Roorkee,
Uttrakhand – 247661